Your question: What is the pitch on a motorcycle chain?

What is the difference between a 530 and 520 chain?

A 520 chain is a smaller pitch chain. Pitch being the distance between rollers. The 520 is a lighter weight chain than the 530. That is why people switch to the 520, but it may not last as long as a 530.

What’s the difference between 520 and 525 chains?

The 5 part just describes the distance between the centers of the link pins (or wherever on the links, basically how long a link is) and the next two numbers describe the width of the chain. So a 520 chain is going to be narrower than a 525(and thus require a narrower front and rear sprocket) and lighter…

What is the pitch of a 520 chain?

520 Non-Standard Roller Chain

Part No. 520
Pitch (P) 0.625
Pin Diameter (D) 0.200
Roller Width (W) 0.250
Roller Diameter (R) 0.400

What does 525 on a chain mean?

A 525 chain (the size my bike uses) has a pitch of 5/8″ (15.88mm) and a roller width of 2.5/8″ (7.94mm). A 530 chain has a pitch of 5/8″ (15.88mm) and a roller width of 3.0/8″ (9.52mm).

IT IS INTERESTING:  What is high mileage for a dual sport motorcycle?

What does 530 mean on a chain?

You will find that 525, 530, and 50 chains will all fit on most sprockets. because they have the same pitch, or distance between the centers of the. hardened steel pins in the center of the rollers. It’s 5/8th’s of an inch. 630 chain has a wider pitch, 3/4th’s of an inch between pin centers…

Can I use a 525 sprocket with 520 chain?

A 525 chain may run on 520 sprockets, but a 520 chain is too narrow to run on 525 sprockets.

What motorcycle chain is best?

The 4 Best Motorcycle Chains

  • ​1. RK Racing Chain 520-SO-120 120-Links O-Ring Chain with Connecting Link.
  • RK Racing Chain GB520XSO-120 120-Links Gold X-Ring Chain with Connecting Link.
  • DID 520ERT2 – 120 link Gold Chain with Connecting Link.
  • Renthal C294 R3-2 O-Ring 520-Pitch 120-Links Chain.

What is a 420 chain?

– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.

What is the pitch of a 530 chain?

Metric Dimensions

Chain Pitch Width
428 12.70mm 7.75mm
520 15.88mm 6.35mm
525 15.88mm 7.85mm
530 15.88mm 9.53mm

Will a 50 sprocket fit a 520 chain?

50 has a 3/8″ roller width while the 520 chain has a 1/4″ roller width. As you point out, only difference in sprockets is the width which would be quite easy for me to face off in my lathe from the # 50 chain’s . 343″ width to the # 520 chain’s .

IT IS INTERESTING:  Question: How many motorcyclists are in the US?

What is chain pitch?

In terms of conveyor chain, pitch is usually defined as the distance between links, as measured from the center of the roller pin on one link to the center of the roller pin on the next link. Note that some precision link conveyors refer to the pitch as the link size.

What does 520 mean on a motorcycle chain?

Usually, bushings separate the rollers from the pins, but there are bushing-less designs. (3) The size of a chain is designated by a three-digit number (520, for example). The distance from the center of one pin to the center of the next is called pitch. Pitch is represented by the first digit, which is 4, 5 or 6.